Catalog
High-Volume Powered Burner.
Unit of Measure

Specifications

Manufacturer

N/A A. O. Smith®

Input Power

N/A 199000 BTU/hr

Tank Capacity

N/A 150 U.S. gal568 L

Type

N/A Liquid Propane Gas Natural Gas

Shipping Weight with Burner

N/A 586 kg1292 lb

Equipment Grade

N/A Commercial

Thermal Efficiency

N/A 80 %

Minimum Front Installation Clearance to Combustibles

N/A 18 in

Minimum Top Installation Clearance to Combustibles

N/A 5 in

Minimum Gas Supply Pressure

N/A 7 inWc

Maximum Gas Supply Pressure

N/A 13 inWc

Maximum Hydrostatic Working Pressure

N/A 160 psi

Industry Standards

N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE/IESNA 90.1 ASME Certified CSA® Certified UL® Listed

Dimensions

Schematic

N/A
Schematic Drawing for Conservationist® Large Volume Powered Burner Commercial Gas Water Heaters

Dimension A

N/A 82-1/4 in208.9 cm

Dimension B

N/A 13-1/2 in34.3 cm

Dimension C

N/A 1/2 in1.3 cm

Dimension D

N/A 29-1/4 in74.3 cm

Dimension E

N/A 1-1/4 in3.2 cm

Dimension F

N/A 36-1/2 in92.7 cm

Dimension G

N/A 6 in15.2 cm

Dimension H

N/A 47 in119.4 cm

Dimension J

N/A 73-1/2 in186.7 cm

Maximum Recovery (ºF)

Recovery at 80 ºF Temperature Rise

N/A 241 gal/h

Recovery at 100 ºF Temperature Rise

N/A 193 gal/h

Recovery at 140 ºF Temperature Rise

N/A 138 gal/h

Maximum Recovery (ºC)

Recovery at 27 ºC Temperature Rise

N/A 912.3 L/h

Recovery at 56 ºC Temperature Rise

N/A 730.5 L/h

Recovery at 78 ºC Temperature Rise

N/A 522.3 L/h

Electrical Characteristics

Motor Power

N/A 1/7 hp

Voltage

N/A 120 V

Frequency

N/A 60 Hz

Phase

N/A Single

Current

N/A 2.5 A

Features

Features

N/A The large-volume powered burner line includes the largest, most powerful A. O. Smith® tank type gas water heaters. With tank capacities up to 600 gallons and firing capacities up to 2.5 million BTUs per hour, these large-volume high-output water heaters are capable of producing over 3,000 gallons (GPH) of hot water per hour at an 80 ºF rise. These heavy-duty industrial grade water heaters are designed and built to handle the most demanding hot water heating requirements of large commercial and industrial users.

Powered Gas Burner
  • Suitable for natural or propane gas.
  • Electronic flame safeguard control with intermittent spark ignition.
  • Main and pilot automatic gas valves with gas pressure regulators.
  • Diaphragm air switch for proof of blower operation.
  • Flame inspection port.
Fully Automatic Controls with Safety Shutoff
  • High-temperature limit control (manual reset).
  • CSA certified and ASME rated T & P relief valve.
  • Hinged-door control compartment for easy access.
  • Upper and lower thermostats for accurate temperature control.
  • Standard control is for 120 - 180 ºF water service
  • Factory-installed low-water cutoff.
Blue Diamond® Glass Lining
  • Proprietary A. O. Smith® glass lining provides superior coverage and unmatched durability.
  • Equipped with multiple anode rods for additional corrosion protection.
Heavy-Duty Jacket
  • Heavy-gauge steel jacket with baked powder-coated finish for durability.
  • Two 3" handhole inspection openings.
Professional Start-up Service
  • Factory Start-Up Included.
    • Required for activating warranty and assuring maximum operating performance. Contact your local sales representatives or Authorized Start-Up Agent to arrange a FREE certified start-up.
  • Assures proper installation and adjusts burner for clean combustion and most operation.
Optional Low NOx Burners
  • Low NOx burners from 400,000 BTUH up to 2 million BTUH.
  • Complies with Texas Low NOx and Air Quality Management Districts with requirements of less than 30 ng/j.

Other Features

Other Features

N/A
  • Two layers of high-temperature ceramic fiber insulation in combustion chamber
  • Flame inspection port opening
  • Mounted on rugged channel iron skids
  • National board stamping
  • ASME-rated temperature and pressure gauge
  • Low-water cutoff
  • CSA certified and ASME rated T&P relief valve
  • Barometric draft regulator
  • 120-volt control circuit
  • Drain valve
  • 180 ºF water service thermostats

Testing and Certifications

Testing and Certifications

N/A Codes and Standards
  • Design-certified by UL (Underwriters Laboratories), according to ANSI Z21.10.3-4.3 CSA® Standards
  • Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1

Options

Options

N/A
  • Factory mutual approved control arrangement
  • High or low water pressure control
  • CSA® certified and ASME rated T&P relief valve
  • Modular graphic burner systems management on heaters with 270,000 BTU input and over
  • Low-NOx burner

Warranty

Warranty

N/A
  • 3-Year Limited Tank Warranty.
  • Factory Start-Up Required - Included for activating warranty and assuring maximum operating performance.
    Contact your local sales representative or Authorized Start-Up A gent to arrange a FREE certified start-up.

Note

Note

N/A Indicates model equipped with "Wayne" burner.

A clearance of 24 inches is recommended from serviceable parts such as relief valve, power burner, drain valve and anodes (anodes are located on side above cold water inlet).

BTP models are Category I appliances (Fan Assisted) and require a negative draft. These units should only be commonly vented with other Category I negative draft appliances per the latest addition of the National Fuel Gas Code. An approved/listed Type "B" venting material is recommended. A negative draft of -0.02" to -0.07" is required in the vent.