Catalog
Unit of Measure

Specifications

Manufacturer

N/A Bradford White®

Capacity

N/A 100 U.S. gal83 Imp. gal379 L

Input Power

N/A 88000 BTU/hr25.7 kW

Type

N/A Liquid Propane Gas

Approximate Shipping Weight

N/A 420 lb191 kg

Test Pressure

N/A 300 psi2068 kPa

Working Pressure

N/A 150 psi1034 kPa

Style

N/A Light-Duty High Input Atmosphere Vent

Size

N/A C

Industry Standards

N/A ANSI Standards Z-21.10.3 ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 100 ºF Temperature Rise

N/A 85 U.S. gal/h71 Imp. gal/h

Recovery at 56 ºC Temperature Rise

N/A 322 L/h

Dimensions

Schematic

N/A
Schematic Drawing for Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters (100T-88 Model)

Floor to Flue Connection A

N/A 69-1/32 in1745 mm

Jacket Diameter B

N/A 28-1/4 in718 mm

Vent Size C

N/A 4 in102 mm

Floor to T and P Connection D

N/A 59-3/8 in1507 mm

Floor to Gas Connection E

N/A 15-17/32 in397 mm

Floor to Space Heating Inlet F

N/A 17-3/4 in448 mm

Floor to Space Heating Outlet G

N/A 50-23/32 in1286 mm

Floor to Water Connection H

N/A 67-23/32 in1651 mm

Depth K

N/A 32-1/4 in797 mm

Features

Features

N/A
  • Bradford White ICON System™ - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter. A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity.
    • Enhanced Performance - Proprietary algorithms provide tighter temperature differentials.
    • Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels (up to 180 ºF).
    • Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.
    • Pilot On Indication - Flashing green LED provides positive indication that pilot is on.
    • Separate Immersed Thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.
  • Factory Installed Hydrojet 2™ Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank.
  • Vitraglas® Lining - Bradford White tanks are lined with a exclusively engineered enamel formula that provides superior protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF.
  • Side Connections - 3/4" NPT tappings that allow easy connections for space heating applications (potable water only).
  • 2" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
  • Pedestal Base (75 gallon).
  • Water Connections - Factory installed true dielectric fittings extend water heater life and eases installation (75T has 1" NPT and 100T has 1-1/4" NPT).
  • Hand Hole Cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits (optional on 75T models).
  • Protective Magnesium Anode Rod.
  • 4" "Snap Lock" Draft Diverter.
  • T&P Relief Valve - Installed.
  • Low Restriction Brass Drain Valve - Durable tamper proof design.

General Information

General Information

N/A All gas water heaters are certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). The 75 gallon model (284 liters) has 1" (25 mm) water connections on 11" (279 mm) centers and 100 gallon model (379 liters) has 1-1/4" (32 mm) water connections on 16" (406 mm) centers. All gas connections are 1/2" (13 mm).

All models design certified by CSA International (formerly AGA/CGA), ANSI standard Z-21.10.3 and peak performance rated.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Suitable for Water (Potable) Heating and Space Heating.

Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.

Warranty

Warranty

N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.

Note

Note

N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed 80% Thermal Efficiency.

Propane models feature a Titanium Stainless Steel propane burner.

100T models feature hand hole cleanout.

Meets NAECA Requirements.