Commercial Water Heaters
Residental Water Heaters
Commercial Water Heaters
Electric Commercial Water Heaters
Bradford White® Electric Commercial Water Heaters
Light Duty Commercial Lowboy Energy Saver Electric Water Heaters
Item # LD-20L3-3-5000W
Item # LD-20L3-3-5000W, Light Duty Commercial Lowboy Energy Saver Electric Water Heaters
Email This Page
Save To Favorites
Unit of Measure:
Approximate Shipping Weight
Wattage Limitations for Non-Simultaneous and Simultaneous Operation
5000 W/5000 W
ASHRAE 90.1b (Current Standards)
Recovery at 60 ºF Temperature Rise
Recovery at 80 ºF Temperature Rise
Recovery at 90 ºF Temperature Rise
Recovery at 100 ºF Temperature Rise
Recovery at 120 ºF Temperature Rise
Recovery at 56 ºC Temperature Rise
Schematic Drawing for Light Duty Commercial Lowboy Energy Saver Electric Water Heaters
Floor to Heater Top A
Jacket Diameter B
Floor to Water Connection C
Floor to T and P Connection D
Floor to Electrical Access E
Applications - Standing at a height of less than 34", Lowboy models are ideal for installations where space is at a premium and are perfect for tight installations such as a closet or under a counter.
Fully Automatic Controls - Fast acting surface-mount thermostats for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (Maximum thermostat setting is 160 ºF.)
Direct Heat Transfer with Immersed Elements - Transfers heat directly and efficiently to the water. Screw-in style.
Factory Installed Hydrojet® Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank. Increases first hour delivery of hot water while minimizing temperature build up in tank.
Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation.
Factory Installed Heat Traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation.
Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
Steel Tank - Heavy gauge steel automatically formed, rolled and welded.
Field Convertible - Units are shipped from factory Three Phase, Non-Simultaneous (120 V and 277 V are shipped Single Phase, Non-Simultaneous). All models can be converted to Single Phase and/or Simultaneous operation in the field.
Voltages Available - 120 V, 208 V, 240 V, 277 V, 480 V.
T&P Relief Valve Included - Side T&P is standard. Optional top T & P location is available and must be specified when ordering.
Low Restriction Brass Drain Valve - Durable tamper proof design.
All models ETL listed. These heaters are wired inter-locking (Non-Simultaneous, Three Phase)
240 V with two 4500 W elements, unless otherwise specified.
All water connections are 3/4" NPT (19 mm). All electrical connections are 3/4" (19 mm).
All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa.).
Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.
3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.
Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed.
All Models include supplied insulation jacket.
NSF Construction not available.
"D" dimension listed as side/top.
Light Duty Commercial Lowboy Energy Saver Electric Water Heaters - 2
Standards for Light Duty Commercial Lowboy Energy Saver Electric Water Heaters
Brochure for Light Duty Commercial Lowboy Energy Saver Electric Water Heaters