Catalog
AdvantagePlus™ is a family of ultra high efficiency commercial gas water heaters with 95 percent thermal efficiency for lower operating costs.
Unit of Measure

Specifications

Manufacturer

N/A Rheem®

Tank Capacity

N/A 55 gal208 L

Input Power

N/A 199000 BTU/hr

Thermal Efficiency

N/A 95 %

Vent Size

N/A 3 in76 mm

Inlet Water Connection

N/A 1-1/2 in38 mm

Outlet Water Connection

N/A 1-1/2 in38 mm

Approximate Shipping Weight

N/A 405 lb184 kg

Type

N/A Liquid Propane Gas Natural Gas

Style

N/A AdvantagePlus™

Size

N/A C

Material

N/A 316 Stainless Steel

Industry Standards

N/A AHRI Certified® NSF UL® Listed

Maximum Recovery

Recovery at 40 ºF Temperature Rise

N/A 573 U.S. gal/h

Recovery at 22 ºC Temperature Rise

N/A 2169 L/h

Recovery at 50 ºF Temperature Rise

N/A 458 U.S. gal/h

Recovery at 28 ºC Temperature Rise

N/A 1735 L/h

Recovery at 60 ºF Temperature Rise

N/A 382 U.S. gal/h

Recovery at 33 ºC Temperature Rise

N/A 1446 L/h

Recovery at 70 ºF Temperature Rise

N/A 327 U.S. gal/h

Recovery at 39 ºC Temperature Rise

N/A 1239 L/h

Recovery at 80 ºF Temperature Rise

N/A 286 U.S. gal/h

Recovery at 45 ºC Temperature Rise

N/A 1084 L/h

Recovery at 90 ºF Temperature Rise

N/A 255 U.S. gal/h

Recovery at 50 ºC Temperature Rise

N/A 964 L/h

Recovery at 100 ºF Temperature Rise

N/A 229 U.S. gal/h

Recovery at 56 ºC Temperature Rise

N/A 867 L/h

Recovery at 110 ºF Temperature Rise

N/A 208 U.S. gal/h

Recovery at 61 ºC Temperature Rise

N/A 789 L/h

Recovery at 67 ºC Temperature Rise

N/A 723 L/h

Recovery at 120 ºF Temperature Rise

N/A 191 U.S. gal/h

Maximum Delivery

Maximum Delivery at 100 ºF (5 Minutes)

N/A 58 U.S. gal

Maximum Delivery at 56 ºC (5 Minutes)

N/A 218 L

Maximum Delivery at 100 ºF (10 Minutes)

N/A 77 U.S. gal

Maximum Delivery at 56 ºC (10 Minutes)

N/A 291 L

Maximum Delivery at 100 ºF (15 Minutes)

N/A 96 U.S. gal

Maximum Delivery at 56 ºC (15 Minutes)

N/A 363 L

Maximum Delivery at 100 ºF (20 Minutes)

N/A 115 U.S. gal

Maximum Delivery at 56 ºC (20 Minutes)

N/A 435 L

Maximum Delivery at 100 ºF (30 Minutes)

N/A 153 U.S. gal

Maximum Delivery at 56 ºC (30 Minutes)

N/A 580 L

Maximum Delivery at 100 ºF (45 Minutes)

N/A 210 U.S. gal

Maximum Delivery at 56 ºC (45 Minutes)

N/A 797 L

Maximum Delivery at 100 ºF (60 Minutes)

N/A 268 U.S. gal

Maximum Delivery at 56 ºC (60 Minutes)

N/A 1014 L

Maximum Delivery at 100 ºF (120 Minutes)

N/A 497 U.S. gal

Maximum Delivery at 56 ºC (120 Minutes)

N/A 1883 L

Maximum Delivery at 100 ºF (180 Minutes)

N/A 726 U.S. gal

Maximum Delivery at 56 ºC (180 Minutes)

N/A 2751 L

Minimum to Recovery Contents

N/A 14

Dimensions

Schematic

N/A
Schematic Drawing for AdvantagePlus™ Ultra High Efficiency Commercial Gas Water Heaters

Dimension A

N/A 73 in1854 mm

Dimension B

N/A 27 in686 mm

Dimension C

N/A 36 in914 mm

Dimension D

N/A 66-3/4 in1695 mm

Dimension E

N/A 6-3/4 in171 mm

Dimension F

N/A 28-7/8 in733 mm

Dimension G

N/A 22 in559 mm

Dimension H

N/A 9-1/2 in241 mm

Features and Benefits

Features and Benefits

N/A Rheem AdvantagePlus™ water heaters offer ultra high efficiency and reliability. Models are available that range from 100,000-199,000 Btu/h, with a temperature setting from 70 to 160 degrees Fahrenheit; 180 degree maximum temperature available on HE55-160 and HE55-199 models, with included booster kit.

Efficiency
  • 95% Thermal efficiency
  • 2" Non-CFC, polyurethane foam insulation reduces standby heat loss
Electronic Control Panel
Self-diagnostic electronic control with HSI ignition control and diagnostics.

Technology & Construction
The heart of the system is a coil heat exchanger, which is constructed of corrosion resistant, high efficiency, 90/10 cupronickel. Stainless steel tank construction requires no anode rods. Durable plastic exterior shell.

Removable Front Cover
Allows for easy access to equipment (24 inches of service clearance is recommended).

Low Cost Venting
No chimney required. Vents through standard PVC, CPVC and ABS pipes, with a vent run up to 85 feet total for exhaust and intake.

Power Direct Vent.
Install as a two pipe power direct vent when air quality or negative air pressure are issues. Optional concentric vent kits are available for side or vertical venting. Optional aluminum outside vent termination kit.

Ultra Low NOx Burner
Design reduces NOx emissions to less than 14 ng/J. (SCAQMD Rule 1146.2 compliant).

Clearances
Zero clearance to combustibles.

General Information

General Information

N/A Certification & Ratings
AdvantagePlus commercial water heaters are UL/ULCX listed and exceed the minimum efficiency requirements of ASHRAE/IES 901b-1992. They are supplied with an CSA/ASME rated temperature and pressure relief valve. The control panel is an integrated solid state temperature and ignition control device with integral diagnostics, LED fault display capability and digital display of temperature setting. All models are North Carolina Code compliant. Meet all safety and construction requirements of ANSI Z-21.10.3.

Certified for 150 psi maximum working pressure.

Testing and Certifications

Testing and Certifications

N/A CSA®/ASME Rated T&P Valve
Factory installed relief valve

Altitude Certification
Certified up to 10,000 feet above sea level

Warranty

Warranty

N/A
  • 3-Year Limited Tank Warranty.

Booster Installation Kit includes

Booster Installation Kit includes

N/A
  • Nibco Tee - 1" x 1" x 1/2" (2 pieces)
  • Female Adapter - 1" (2 pieces)
  • Dial Thermometer (2 pieces)
  • Expansion Tank - 4-1/2 Gallon
  • Grundfos 3 Speed Pump with Check Valve
  • Nibco 1.2" x 12" Fitting Air Chamber
  • Vacuum Relief Valve
  • Pressure Gauge - 0-200 PSI
  • Nibco Tee 712R - 1" x 1" x 3/4" (2 pieces)
  • Nibco Tee 714RR - 1" x 1/2" x 1"
  • Nibco Tee - 1" x 1/2" x 1" Copper
  • Reducing Coupling
  • Pressure Reducing Valve
  • Nibco Male Adapter - 1"

Note

Note

N/A No Chimney Required

Recovery rating is based on thermal efficiencies obtained in an UL certified laboratory.

Maximum setpoint of 160 ºF.

130,000 Btu/h models are certified to be installed with 2" venting.

All models require a 120 V power source.

0" clearance to combustibles on all advantage plus units, however, a 24" control panel service clearance is recommended.

Models with inputs of 100,000 BTU/hr and 130,000 BTU/hr are certified to vent with 2" schedule 40 PVC or CPVC pipe.

(For Canadian Installation please use ULC-S636 PVC or CPVC pipe.)

An aluminum outside vent termination kit is also available. (SP12162)