Call Now
 844.323.5959
 | Shipping 
 | Tax 
 | Terms
 Quotes 0 Items
All Categories > Commercial Water Heaters > NON NOx Commercial Water Heaters > State® NON NOx Commercial Water Heaters > Item # SBB75 76NE  

Item # SBB75 76NE, Model SBB75 76NE Sandblaster® Ultra-Low NOx Commercial Gas Water Heaters


    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

The SBB75 commercial gas water heater meets California Air Quality Management District Requirements for NOx emissions of 14 ng/j or 20 ppm. This model is equipped with a pre-wired, factory-mounted blower. This blower provides more efficient control of heat and helps ensure an adequate supply of make-up air. Prior to ignition, the control proves a working draft.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Maximum Recovery  · Electrical Characteristics  · Codes and Standards  · Testing and Certifications  · Options  · Features  · Warranty  · Note

Specifications

Manufacturer

State®

Approximate Capacity

74 gal
280
L

Input Power

75100 BTU/hr
22
kW·h

Manifold Pressure

4 inWc
1.12
kPa

Type

Natural Gas

Style

Sandblaster® Ultra Low NOx

Size

C

Maximum Hydrostatic Working Pressure

150 psi

Industry Standards

AHRI Certified®
ANSI Z-21.10.3 - CSA 4.3

ASHRAE/IESNA 90.1

CSA® Certified

UL® Listed


Dimensions

Schematic

Dimension A

65-7/8 in
167.22
cm

Dimension B

57-7/8 in
145.23
cm

Dimension C

30-15/16 in
78.58
cm

Dimension D

25-1/4 in
64.14
cm

Dimension E

15-1/2 in
38.6
cm

Dimension F

4 in
10.2
cm

Dimension G

15-3/8 in
40
cm

Dimension H

16 in
40.6
cm

Dimension J

2-1/4 in
5.71
cm

Dimension K

1 in

Dimension L

1/2 in

Dimension M

12-1/4 in
31.1
cm


Maximum Recovery

Recovery at 30 ºF Temperature Rise

243 gal/h

Recovery at 17 ºC Temperature Rise

920 L/h

Recovery at 40 ºF Temperature Rise

182 gal/h

Recovery at 23 ºC Temperature Rise

688 L/h

Recovery at 50 ºF Temperature Rise

145 gal/h

Recovery at 28 ºC Temperature Rise

549 L/h

Recovery at 60 ºF Temperature Rise

122 gal/h

Recovery at 33 ºC Temperature Rise

460 L/h

Recovery at 70 ºF Temperature Rise

104 gal/h

Recovery at 39 ºC Temperature Rise

392 L/h

Recovery at 80 ºF Temperature Rise

91 gal/h

Recovery at 44 ºC Temperature Rise

344 L/h

Recovery at 90 ºF Temperature Rise

81 gal/h

Recovery at 50 ºC Temperature Rise

306 L/h

Recovery at 100 ºF Temperature Rise

73 gal/h

Recovery at 56 ºC Temperature Rise

277 L/h

Recovery at 110 ºF Temperature Rise

66 gal/h

Recovery at 61 ºC Temperature Rise

251 L/h

Recovery at 120 ºF Temperature Rise

60 gal/h

Recovery at 67 ºC Temperature Rise

228 L/h

Recovery at 130 ºF Temperature Rise

56 gal/h

Recovery at 72 ºC Temperature Rise

213 L/h

Recovery at 140 ºF Temperature Rise

52 gal/h

Recovery at 78 ºC Temperature Rise

199 L/h


Electrical Characteristics

Voltage

120 V

Frequency

60 Hz

Current

<5 A


Codes and Standards
  • Design-certified according to ANSI Z21.10.3-CSA® 4.3 standards governing storage-type water heaters
  • California Energy Commission
  • Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1
  • Design-certified by Underwriters Laboratories
  • Certified for use on combustible flooring
  • Complies with SCAQMD Rule 1146.2 and other Air Quality Management Districts with similar requirements of 14 ng/j or 20 ppm




Testing and Certifications
  • CSA® Certified and ASME Rated T&P Relief Valve
  • Maximum Hydrostatic Working Pressure: 150 PSI
  • 80% Thermal Efficiency




Options
  • Optional Leg Kit to Meet NSF Standard 5.
  • (Part #9006645005)




Features
Factory-Installed Blower
  • Control proves draft prior to ignition.
  • No draft hood or barometric damper required.
  • Blower is factory-mounted with a 6-foot power cord: requires 120 V, 3 amp or less electrical system connection.
Intelli-Vent™ Gas Control
  • Equipped with nearly indestructible silicon nitride hot surface ignitor.
  • Advanced electronics for more precise control of water temperature.
  • Easy-to-understand system diagnostics.
Rated as Category I Appliance
  • Category I appliance: uses standard metal, single-wall or "B" type vent.
  • May be common vented with other Category I appliances.
  • Vent connects directly to blower outlet.
Fully Automatic Control System
  • Auto-reset gas shutoff device prevents excessive water temperature.
  • Adjustable thermostat with 120 ºF to 180 ºF range.
  • Gas pressure regulator.
Glasslined Tank
  • Anode rods with stainless steel core provides additional corrosion protection.
Handhole Cleanout
  • Allows easy access to tank interior for cleaning.




Warranty
  • 3-Year Tank Warranty / 1-Year Parts Limited Warranty.




Note
Recovery Capacities (Based on 80% thermal efficiency).



 MORE IMAGES 

·  Standards for Model SBB75 76NE Sandblaster® Ultra-Low NOx Commercial Gas Water Heaters


 DOWNLOADS 

Brochure for Model SBB75 76NE Sandblaster® Ultra-Low NOx Commercial Gas Water Heaters
(PDF, 330KB)


^