Catalog
| Items |
 /Asset/a1515.jpg CG250N65 HTP® Heavy Duty Commercial Gas Fired Water Heaters |
/Asset/a1515.jpg CG300N65 HTP® Heavy Duty Commercial Gas Fired Water Heaters |
/Asset/a1515.jpg CG125N73 HTP® Heavy Duty Commercial Gas Fired Water Heaters |
/Asset/a1515.jpg CG150N73 HTP® Heavy Duty Commercial Gas Fired Water Heaters |
/Asset/a1515.jpg CG199N73 HTP® Heavy Duty Commercial Gas Fired Water Heaters |
|||||
| Description |
|
|||||||||
| Manufacturer | HTP® | |||||||||
| Capacity | 65 gal | 65 gal | 73 gal | 73 gal | 73 gal | |||||
| Input Power | 250000 BTU/hr | 300000 BTU/hr | 125000 BTU/hr | 150000 BTU/hr | 199000 BTU/hr | |||||
| Recovery at 100 ºF Temperature Rise | 242.4 gal/h | 290.9 gal/h | 121.2 gal/h | 145.5 gal/h | 193.8 gal/h | |||||
| Inlet/Outlet (NPT) | 1.5 in | |||||||||
| Shipping Weight | 465 lb | 465 lb | 429 lb | 429 lb | 429 lb | |||||
| Schematic |
 Schematic Drawing for HTP® Heavy Duty Commercial Gas Fired Water Heaters |
|||||||||
| Dimension A | 15-3/4 in40 cm | |||||||||
| Dimension B | 52-1/8 in132 cm | 52-1/8 in132 cm | 52-1/2 in133 cm | 52-1/2 in133 cm | 52-1/2 in133 cm | |||||
| Dimension C | 64-3/8 in164 cm | |||||||||
| Dimension D | 6-3/8 in16 cm | |||||||||
| Dimension E1 | 25-1/4 in64 cm | |||||||||
| Dimension E2 | 58-1/4 in148 cm | |||||||||
| Dimension E3 | 25-1/4 in64 cm | |||||||||
| Dimension E4 | 58-1/4 in148 cm | |||||||||
| Dimension F | 70-7/8 in180 cm | 71-5/8 in182 cm | 69-1/4 in176 cm | 70-7/8 in180 cm | 70-7/8 in180 cm | |||||
| Dimension G | 33 in84 cm | |||||||||
| Dimension H | 7 in18 cm | 8 in20 cm | 5 in13 cm | 6 in15 cm | 6 in15 cm | |||||
| Dimension I | 26-1/2 in67 cm | |||||||||
| Type | Natural Gas | |||||||||
| Features |
Long lasting blue cobalt glass is fused to specially formulated steel at 1,600 ºF to provide the best coating available against corrosion. The tank is certified at a test pressure of 300 PSI and a working pressure of 150 PSI.
Quiet Burner! The burner tray slides out easily for quick inspection & easy maintenance.
Closes automatically when the demand for heat stops, reducing stand-by heat loss.
The thermostat is fully adjustable up to 180 ºF. It is equipped with an integrated energy cutoff (ECO) and high temperature cut-off switch to protect against overheating.
Designed to give a visual indication of the operational status of the water heater. This panel also identifies where to begin troubleshooting a non-functional water heater. |
|||||||||
| More Steel Where It Counts |
Every commercial gas water heater endures constant day-to-day stress due to frequent changes in temperature. Critical stress points are located where tank components are welded - most notably at the flue tubes and where the tank bottom joins the tank. HTP® has made these stress points much more leak resistant thru design, extra thick steel and special welding techniques. The largest steel collar used in the industry is welded from outside of the tank bottom and top, permitting stronger welding of the flue tubes. The tank bottom and top and the flue tubes are glass-lined separately with an industrial grade coating of a blue cobalt glass. The refractory combustion chamber is insulated entirely with 3/4" of ceramic fiber. This feature permits better heat retention in the combustion chamber, translating into a higher heat exchange to the water. |
|||||||||
| Available Kits |
High altitude kits available for units installed at altitudes over 7000 feet.
|
|||||||||
| What's in the Box |
|
|||||||||
| Standard Features |
|
|||||||||
| Optional Equipment |
|
|||||||||
| Warranty |
|
|||||||||
| Note | Models of 125,000 and 150,000 Btuh and their derated versions can also use a 1/2" gas connection. | |||||||||
|
|
||||||||||
