Water Heater Sales - Titan™ Power Burner Low NOx Commercial Gas Water Heaters

For medium-demand commercial applications, State Titan™ (GPG and GPV) commercial gas water heaters offer precise power burner performance, plus flexible venting options including conventional atmospheric venting, sidewall venting or direct venting. Professional start-up service is also available from State on these Titan™ units to help ensure optimum performance.

Request Information

Unit of Measure

Items	GPV85 540 NEA Titan™ Power Burner Low NOx Commercial Gas Water Heaters Request Quote	GPV85 650 NEA Titan™ Power Burner Low NOx Commercial Gas Water Heaters Request Quote	GPV85 740 NEA Titan™ Power Burner Low NOx Commercial Gas Water Heaters Request Quote	GPG85 540 NEA Titan™ Power Burner Low NOx Commercial Gas Water Heaters Request Quote	GPG85 650 NEA Titan™ Power Burner Low NOx Commercial Gas Water Heaters Request Quote
Manufacturer	N/A State®
Input Power	N/A 540000 BTU/hr	N/A 650000 BTU/hr	N/A 740000 BTU/hr	N/A 540000 BTU/hr	N/A 650000 BTU/hr
Tank Capacity	N/A 321.7 L	N/A 321.7 L	N/A 321.7 L	N/A 85 U.S. gal	N/A 85 U.S. gal
First Hour Rating at 100 ºF Temperature Rise	N/A 2206.7 L	N/A 2611.7 L	N/A 2944.7 L	N/A 583 U.S. gal	N/A 690 U.S. gal
Recovery at 40 ºF Temperature Rise	N/A	N/A	N/A	N/A 1309 gal/h	N/A 1579 gal/h
Recovery at 4 ºC Temperature Rise	N/A 4954.6 L/h	N/A 5976.5 L/h	N/A 6790.3 L/h	N/A	N/A
Recovery at 100 ºF Temperature Rise	N/A	N/A	N/A	N/A 523 gal/h	N/A 630 gal/h
Recovery at 56 ºC Temperature Rise	N/A 1979.6 L/h	N/A 2384.6 L/h	N/A 2717.6 L/h	N/A	N/A
Recovery at 140 ºF Temperature Rise	N/A	N/A	N/A	N/A 374 gal/h	N/A 450 gal/h
Recovery at 78 ºC Temperature Rise	N/A 1415.6 L/h	N/A 1703.3 L/h	N/A 1937.9 L/h	N/A	N/A
Schematic	N/A Schematic Drawing for Titan™ Power Burner Low NOx Commercial Gas Water Heaters (GPV Models)	N/A Schematic Drawing for Titan™ Power Burner Low NOx Commercial Gas Water Heaters (GPV Models)	N/A Schematic Drawing for Titan™ Power Burner Low NOx Commercial Gas Water Heaters (GPV Models)	N/A Schematic Drawing for Titan™ Power Burner Low NOx Commercial Gas Water Heaters (GPG Models)	N/A Schematic Drawing for Titan™ Power Burner Low NOx Commercial Gas Water Heaters (GPG Models)
Dimension A	N/A	N/A	N/A	N/A 80-3/4 in2051 mm	N/A 80-3/4 in2051 mm
Dimension B	N/A	N/A	N/A	N/A 73 in1854 mm	N/A 73 in1854 mm
Dimension C	N/A	N/A	N/A	N/A 32-1/4 in819 mm	N/A 32-1/4 in819 mm
Dimension D	N/A	N/A	N/A	N/A 9 in229 mm	N/A 9 in229 mm
Dimension E	N/A	N/A	N/A	N/A 6 in152 mm	N/A 8 in203 mm
Dimension F	N/A	N/A	N/A	N/A 26-1/2 in673 mm	N/A 26-1/2 in673 mm
Dimension G	N/A	N/A	N/A	N/A 93 in2362 mm	N/A 93 in2362 mm
Dimension H	N/A	N/A	N/A	N/A 29-1/2 in749 mm	N/A 29-1/2 in749 mm
Dimension I	N/A	N/A	N/A	N/A 48-1/2 in1232 mm	N/A 48-1/2 in1232 mm
Gas Connection	N/A	N/A	N/A	N/A 1 in25.4 mm	N/A 1 in25.4 mm
Type	N/A Natural Gas
Style	N/A State Titan®
Size	N/A C
Approximate Shipping Weight	N/A	N/A	N/A	N/A 950 lb431 kg	N/A 950 lb431 kg
Industry Standards	N/A AHRI Certified® ASME Certified CSA® Certified Start-Up UL® Listed
Maximum Working Pressure	N/A 160 psi
Features	N/A Powered Gas Low NOx Burner (Natural Gas Only) Premix burner operation includes internal Flue Gas Recirculation (FGR). Safety features: Internal blocked flue sensor, separate pilot system, internal thermal cutoff and anti-flashback barrier. Three Venting Options Conventional atmospheric venting on GPG models only with supplied barometric draft regulating damper. Horizontal atmospheric sidewall venting or direct venting on GPV models only. For sidewall venting order Vent Kit Part # 9500007229. For direct venting order Vent Kit Part # 9910001005. Automatic Controls Safety shut-off, high-temperature limit control. Dual thermostat for accurate temperature adjustment from 120 ºF to 180 ºF. Patented "Dome Design" Combustion Draft-equalizing dome balances pressure inside combustion chamber for optimum flue loading and efficient heat transfer. Adjustable Damper for High-Altitude Installations Air intake damper easily reset for high-altitude installation by authorized start-up agent. ASME Tank Construction - Rated Working Pressure 160 psi Factory-Installed CSA Certified and ASME Rated T & P Relief Valve Glasslined Tank With multiple anode rods for long-term protection against corrosion. Flame Inspection Port Handhole Cleanout For easy removal of sediment from tank bottom.
Testing and Certifications	N/A Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1 The GPG85 540 and 650 comply with SCAQMD 1146.2. The GPG85 740 meets low NOx code requirements for Texas and California requiring less than 40 ppm
Warranty	N/A 3-Year Limited Tank Warranty.
Note	N/A Based on 80% Thermal Efficiency obtained in State engineering laboratories. To compensate for effects of high altitude above 2,000 feet, recovery ratings should be reduced 4% for every 1,000 feet above sea level. Current Draw (120V, 60Hz, 1 Phase): 5.0 amps, use 15 amps supply power.	N/A Based on 80% Thermal Efficiency obtained in State engineering laboratories. To compensate for effects of high altitude above 2,000 feet, recovery ratings should be reduced 4% for every 1,000 feet above sea level. Current Draw (120V, 60Hz, 1 Phase): 5.0 amps, use 15 amps supply power.	N/A Based on 80% Thermal Efficiency obtained in State engineering laboratories. To compensate for effects of high altitude above 2,000 feet, recovery ratings should be reduced 4% for every 1,000 feet above sea level. Current Draw (120V, 60Hz, 1 Phase): 5.0 amps, use 15 amps supply power. Minimum gas supply pipe size is 1 1/4". Maximum supply gas pressure 14" W.C.	N/A Based on 80% Thermal Efficiency obtained in State engineering laboratories. To compensate for effects of high altitude above 2,000 feet, recovery ratings should be reduced 4% for every 1,000 feet above sea level. Current Draw (120 V, 60 Hz, 1 Phase): 5.0 amps, use 15 amps supply power. Minimum gas supply pipe size is 1 1/4". Maximum supply gas pressure 14" W.C.	N/A Based on 80% Thermal Efficiency obtained in State engineering laboratories. To compensate for effects of high altitude above 2,000 feet, recovery ratings should be reduced 4% for every 1,000 feet above sea level. Current Draw (120V, 60Hz, 1 Phase): 5.0 amps, use 15 amps supply power. Minimum gas supply pipe size is 1 1/4". Maximum supply gas pressure 14" W.C.