Catalog
Request Information
Sandblaster® is the original money-saving self-cleaning water heater. It provides outstanding performance and installation flexibility for new construction and replacement applications. The Sandblaster® SBD series offers installer-friendly features, including compact low-profile design, multiple options for water connections and low installation clearances.
Unit of Measure

Specifications

Manufacturer

 N/A State®

Input Power

 N/A 390000 BTU/hr

Tank Size

 N/A 100 U.S. gal379 L

First Hour Rating

 N/A 458 U.S. gal1733 L

Standard Shipping Weight

 N/A 760 lb345 kg

ASME Shipping Weight

 N/A 874 lb396 kg

Thermal Efficiency

 N/A 80 %

Maximum Hydrostatic Working Pressure

 N/A 160 psi

Style

 N/A Sandblaster®

Size

 N/A C

Type

 N/A Gas

Industry Standards

 N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE/IESNA 90.1 ASME Certified CSA® 4.3 NSF UL® Listed

Maximum Recovery

Recovery at 40 ºF Temperature Rise

 N/A 945 gal/h

Recovery at 22 ºC Temperature Rise

 N/A 3576.8 L/h

Recovery at 100 ºF Temperature Rise

 N/A 387 gal/h

Recovery at 56 ºC Temperature Rise

 N/A 1464.9 L/h

Recovery at 140 ºF Temperature Rise

 N/A 270 gal/h

Recovery at 78 ºC Temperature Rise

 N/A 1022 L/h

Dimensions

Schematic

 N/A
Schematic Drawing for Sandblaster® SBD Self-Cleaning Commercial Gas Water Heaters

Dimension A

 N/A 75-1/2 in192 cm

Dimension B

 N/A 4-1/2 in12 cm

Dimension C

 N/A 67-1/2 in171 cm

Dimension D

 N/A 58-1/4 in148 cm

Dimension E

 N/A 26-3/4 in68 cm

Dimension F

 N/A 23 in58 cm

Dimension G

 N/A 3/4 in

Dimension H

 N/A 59 in150 cm

Dimension I

 N/A 8 in20 cm

Dimension J

 N/A 30-1/4 in77 cm

Water Connection

Top Inlet/Outlet Water Connection

 N/A 1-1/2 in

Front Inlet/Outlet Water Connection

 N/A 2 in

Back Inlet/Outlet Water Connection

 N/A 2 in

Electrical Characteristics

AC Voltage

 N/A 120 V

Current

 N/A 0.7 A

AC Voltage with Power Venter

 N/A 120 V

Full Load Current

 N/A 3 A

Features

Features

 N/A Self-Cleaning Hydro Cannon™
  • Significantly reduces sediment buildup inside the tank.
  • Maintains rated thermal efficiency, reduces water heating costs.
  • Maximizes tank life.
Automatic Flue Damper (120 - 390 Models)
  • Automatic motorized flue damper helps minimize standby heat loss.
  • Low-profile draft diverter helps for installation in tight spaces.
Three Water Connection Options
  • Hot and cold water connections can be made through front, top or rear of unit.
  • Hydro Cannon™ operates when cold water is connected through front.
Intermittent Electronic Ignition
  • Eliminates standing pilot, saves energy.
  • Includes power ON/OFF switch.
  • Provides flame failure response in less than one second.
Glasslined Tank with Multiple Anode Rods
  • Provides outstanding protection against corrosion.

Testing and Certifications

Testing and Certifications

 N/A
  • CSA® Certified and ASME Rated T&P Relief Valve, Factory-Installed
  • Meets the Thermal Efficiency and Standby Loss Requirements of the U.S. Department of Energy and Current Edition of ASHRAE/IESNA 90.1
    • Design-certified by Underwriters Laboratories (UL), according to ANSIZ21.10.3-CSA® 4.3 standards governing storage-type water heaters
    • Design-certified by Underwriters Laboratories Sanitation to NSF Standard 5 for 180 ºF (62 ºC) water
    • Optional ASME tank construction available

Warranty

Warranty

 N/A
  • 3-Year Limited Tank Warranty.

Other Features

Other Features

 N/A Fully Automatic Control System
  • Manual-reset gas shut-off device prevents excessive water temperature
  • Adjustable thermostat with 120 to 180 ºF range
  • Gas pressure regulator and pilot filter
Handhole Cleanout
  • Allows easy access to tank interior for cleaning
Plug Kits
  • Pipe nipples and caps included to plug unused water connections

Options

Options

 N/A Manifold Kits for Multiple Heater Installations
  • 2-unit kit, Part Number 9003426205
  • 3-unit kit, Part Number 9003427205
  • 4-unit kit, Part Number 900342820
Optional Leg Kit to Meet NSF Standard 5
  • For all SBD models, Part Number 9003425205
Side Wall Power Venting Kits
  • For SBD71 120NE through SBD100 199NES, Part Number 9006015005
  • For SBD100 250NE through SBD100 390NE, Part Number 9006016005
  • For installation of approved power venter to operate in conjunction with water heater thermostat
  • Field wiring should conform to latest version of the National Electric Code ANSI/NFPA No. 70
  • For more information, consult manual shipped with water heater or contact the State Water Heaters

Note

Note

 N/A Maximum gas supply pressure (natural and propane gas): 13.8" w.c.
Minimum gas supply pressure, natural gas: 4.5" w.c. Minimum gas supply pressure, propane gas: 10" w.c.
Manifold pressure, natural gas: 3.5" w.c. Manifold pressure, propane gas: 10" w.c.