Catalog
Unit of Measure
Specifications
Manufacturer |
N/A A. O. Smith® |
Maximum Working Pressure |
N/A 150 psi |
Maximum Gas Inlet Pressure |
N/A 14 inWc |
Approximate Capacity |
N/A 98 gal371 L |
Input Rating |
N/A 75100 BTU/hr22 kW/hr |
Type |
N/A Natural Gas |
Approximate Shipping Weight |
N/A 350 lb158.8 kg |
Finish |
N/A Baked Enamel |
Equipment Grade |
N/A Commercial |
Industry Standards |
N/A AHRI Certified® ASME Certified CSA® Certified UL® Listed |
Maximum Recovery (ºF)
Recovery at 30 ºF Temperature Rise |
N/A 246 gal/h |
Recovery at 40 ºF Temperature Rise |
N/A 184 gal/h |
Recovery at 50 ºF Temperature Rise |
N/A 148 gal/h |
Recovery at 60 ºF Temperature Rise |
N/A 123 gal/h |
Recovery at 70 ºF Temperature Rise |
N/A 105 gal/h |
Recovery at 80 ºF Temperature Rise |
N/A 92 gal/h |
Recovery at 90 ºF Temperature Rise |
N/A 82 gal/h |
Recovery at 100 ºF Temperature Rise |
N/A 74 gal/h |
Recovery at 110 ºF Temperature Rise |
N/A 67 gal/h |
Recovery at 120 ºF Temperature Rise |
N/A 62 gal/h |
Recovery at 130 ºF Temperature Rise |
N/A 57 gal/h |
Recovery at 140 ºF Temperature Rise |
N/A 53 gal/h |
Maximum Recovery (ºC)
Recovery at 17 ºC Temperature Rise |
N/A 927 L/h |
Recovery at 22 ºC Temperature Rise |
N/A 695 L/h |
Recovery at 28 ºC Temperature Rise |
N/A 557 L/h |
Recovery at 33 ºC Temperature Rise |
N/A 462 L/h |
Recovery at 39 ºC Temperature Rise |
N/A 397 L/h |
Recovery at 45 ºC Temperature Rise |
N/A 347 L/h |
Recovery at 50 ºC Temperature Rise |
N/A 309 L/h |
Recovery at 56 ºC Temperature Rise |
N/A 278 L/h |
Recovery at 61 ºC Temperature Rise |
N/A 252 L/h |
Recovery at 67 ºC Temperature Rise |
N/A 233 L/h |
Recovery at 72 ºC Temperature Rise |
N/A 214 L/h |
Recovery at 78 ºC Temperature Rise |
N/A 198 L/h |
Dimensions
Features
Features |
N/A
The BL-100 is an Ultra-Low NOx atmospheric vent commercial gas water heater which meets the thermal efficiency and standby loss requirements of the U. S. Department of Energy and Current Edition ASHRAE/IESNA 90.1. Fully Automatic Controls with Safety Shutoff - Accurate, dependable control system requires no electric connections. Fixed automatic gas shutoff device for added safety. Not recommended for 180 ºF sanitizing. Heavy Gauge Steel Jacket - Finished with baked enamel over bonderized undercoat. Glasslined Tank - Maximizes tank life. Foam Insulation - Saves fuel, helps reduce standby heat loss. Ultra-Low NOx Emissions - Complies with SCAQMD Rule 1146.2 and other Air Quality Management Districts with similar requirements of 14 ng/j or 20 ppm. Easy-To-Install - Completely factory-assembled. Only gas, water and vent connections need to be made. All connections are located in front and top of heaters for ease-of-installation and service. Draft Diverter - Low profile diverter furnished as standard equipment. Handhole Cleanout - Allows easy tank cleaning.
|