Catalog
Request Information
Unit of Measure

Specifications

Manufacturer

 N/A Bradford White®

Capacity

 N/A 119 U.S. gal99 Imp. gal450 L

Approximate Shipping Weight

 N/A 312 lb142 kg

Voltage

 N/A 208 V240 V277 V380 V415 V480 V

Phase

 N/A Single Three

Input Power

 N/A 12 kW

Each Element Power

 N/A 4000 W

Kit Part Numbers for 208 V

 N/A 265-43942-15

Kit Part Numbers for 240 V

 N/A 265-43942-09

Kit Part Numbers for 480 V

 N/A 265-43942-03

Test Pressure

 N/A 300 psi2068 kPa

Working Pressure

 N/A 150 psi1034 kPa

Style

 N/A Triflex Medium-Duty

Size

 N/A C

Type

 N/A Electric

Industry Standards

 N/A ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 40 ºF Temperature Rise

 N/A 124 gal/h

Recovery at 100 ºF Temperature Rise

 N/A 74 U.S. gal/h62 Imp. gal/h50 gal/h

Recovery at 140 ºF Temperature Rise

 N/A 35 gal/h

Recovery at 56 ºC Temperature Rise

 N/A 280 L/h

Dimensions

Schematic

 N/A
Schematic Drawing for Commercial Medium Duty-3 Element Energy Saver Electric Water Heaters

Floor to Heater Top A

 N/A 63 in1600 mm

Jacket Diameter B

 N/A 28-1/4 in730 mm

Floor to Water Connection C

 N/A 64 in1626 mm

Floor to T and P Connection D

 N/A 64-1/8 in1629 mm

Floor to Control Box E

 N/A 61-3/8 in1568 mm

Control Box to Back of Heater F

 N/A 30-7/8 in784 mm

Electrical Characteristics

Full Load Current Single Phase 208 V

 N/A 57.7 A

Full Load Current Three Phase 208 V

 N/A 33.3 A

Full Load Current Single Phase 240 V

 N/A 50 A

Full Load Current Three Phase 240 V

 N/A 28.9 A

Full Load Current Single Phase 277 V

 N/A 43.3 A

Full Load Current Single Phase 380 V

 N/A 18.2 A

Full Load Current Single Phase 415 V

 N/A 16.7 A

Full Load Current Single Phase 480 V

 N/A 25 A

Full Load Current Three Phase 480 V

 N/A 14.4 A

Features

Features

 N/A
  • Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating. (Maximum thermostat setting is 185 ºF.)
  • Direct Heat Transfer with Three Immersed Incoloy Elements - Transfers heat directly and efficiently to the water. Screw-in style element.
  • Factory Installed Hydrojet® Sediment Reduction System - Cold water inlet sediment reducing device helps prevent sediment build up in the tank.
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
  • 2" Non-CFC Foam Insulation - Covers the side and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
  • Water Connections - 1-1/4" NPT factory installed true dielectric fittings extend water heater life and eases installation.
  • Conversion Kits - Design certified by ETL for field conversion. Conversion kits are available to convert any one model to a variety of voltages, kW inputs and phase. (kit part numbers on reverse side.)
  • Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
  • Steel Tank - Heavy gauge steel automatically formed, rolled and welded.
  • T&P Relief Valve - Supplied.
  • Low Restriction Brass Drain Valve - Durable tamper proof design.

General Information

General Information

 N/A All models ETL listed.

All potable water connections are 1-1/4" NPT (25 mm) on 8" (203 mm) centers.

All electrical connections are 3/4" (19 mm) NPT.

All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa).

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Warranty

Warranty

 N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.

Note

Note

 N/A Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed.

All models are wired 240 V, 3-phase, 18 kW. Other voltages, wattages and kW are available and must be specified when ordering.

NSF Construction available.