Catalog
Unit of Measure

Specifications

Manufacturer

 Bradford White®

Capacity

 6 U.S. gal5 Imp. gal23 L

Approximate Shipping Weight

 33 lb15 kg

Power

 4500 W

Voltage

 208 V240 V277 V480 V

Phase

 Single

Test Pressure

 300 psi2068 kPa

Working Pressure

 150 psi1034 kPa

Electrical Connection

 3/4 in19 mm

Type

 Electric

Style

 Light-Duty Commercial Wall Hung

Size

 C

Industry Standards

 ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 60 ºF Temperature Rise

 31 gal/h

Recovery at 80 ºF Temperature Rise

 23 gal/h

Recovery at 90 ºF Temperature Rise

 21 gal/h

Recovery at 100 ºF Temperature Rise

 6 U.S. gal/h5 Imp. gal/h19 gal/h

Recovery at 120 ºF Temperature Rise

 15 gal/h

Recovery at 56 ºC Temperature Rise

 23 L/h

Dimensions

Schematic

Schematic Drawing for Light Duty Commercial Wall Hung Energy Saver Electric Water Heaters

Height A

 15-3/4 in400 mm

Jacket Diameter B

 14 in356 mm

Wall to Front C

 14-5/8 in372 mm

Height to Bracket D

 11-3/4 in298 mm

Height to T and P Connection E

 11-7/8 in302 mm

Top of Heater to Electrical Access F

 17 in432 mm

Features

Features
  • Fully Automatic Controls - Fast acting surface-mount thermostat for automatic temperature control. Factory installed sensitive manual reset energy cut-off for safety to prevent overheating.
  • Direct Heat Transfer with a Single Immersed Element - Transfers heat directly and efficiently to the water. Screw-in style element.
  • Vitraglas® Lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF (871 ºC).
  • 1" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity (30 gallon model has 2").
  • Factory Installed Heavy Duty Wall Mounting Bracket - no additional brackets or modifications required.
  • Water Connections - 3/4" NPT factory installed true dielectric fittings extend water heater life and eases installation. Located on the bottom for easier installation.
  • Protective Magnesium Anode Rod - Provides added protection against corrosion for long trouble-free service.
  • Steel Tank - Heavy gauge steel automatically formed, rolled, and welded.
  • Voltages Available - 120 V, 208 V, 240 V, 277 V, 480 V.
  • Single Phase Operation Only.
  • T&P Relief Valve - Included.

General Information

General Information

 All models ETL listed. These heaters are wired Single Phase, 120 V with one 1500 W element, unless otherwise specified.

All water and electrical connections are 3/4" (19 mm) NPT.

All models certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa).

Applicable models CSA® verified for energy performance in accordance with C191.1-M90.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Warranty

Warranty
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.

Note

Note

 Meet or exceed ASHRAE 90.1b (Current Standard) C.E.C. Listed

Maximum wattage at any voltage is 3000 W.

Single element only.

NSF Construction not available.