Catalog
Request Information
Designed as the Universal Replacement for All brands of Non-Ultra-Low NOx commercial models

Ultra-Low NOx Heavy Duty Commercial Product Offering - The most complete line - 12 models ranging from 125,000 BTU to 512,000 BTU input.
Unit of Measure

Specifications

Manufacturer

 N/A American Standard®

Tank Capacity

 N/A 80 gal

Input Power

 N/A 399000 BTU

Thermal Efficiency

 N/A 80.79 %

Size

 N/A C

Type

 N/A Natural Gas

Industry Standards

 N/A C.E.C. Listed ETL

Dimensions

Schematic

 N/A
Schematic Drawing for Ultra-Low NOx Heavy Duty Commercial Gas Water Heaters

Exterior Dimension A

 N/A 74-1/4 in

Exterior Dimension B

 N/A 30-1/4 in

Exterior Dimension C

 N/A 66-1/4 in

Vent Size

 N/A 8 in

Rear and Front Water Connection

 N/A 2 in

Height to Rear and Front Hot Water I.P.S. Connection F

 N/A 57 in

Height to Rear and Front Cold Water I.P.S. Connection G

 N/A 19-1/4 in

Gas I.P.S. Connection Height H

 N/A 4-1/2 in

Gas I.P.S. Connection Size

 N/A 3/4 in

Height to T and P Opening J

 N/A 58-1/4 in

T and P Opening

 N/A 1 in

Width with Blower K

 N/A 22 in

Width with Blower L

 N/A 6.75 in

Width with Blower M

 N/A 37.25 in

Maximum Hot Water Delivery

One Hour Recovery at 100 ºF Temperature Rise

 N/A 390.7 gal/h

Maximum Hot Water Delivery (1 Hour)

 N/A 447 L

Maximum Hot Water Delivery (2 Hours)

 N/A 838 L

Maximum Hot Water Delivery (3 Hours)

 N/A 1229 L

Maximum Hot Water Delivery Recovery at 100 ºF Temperature Rise

 N/A 6.5 g/min

Storage Capacity

 N/A 80 U.S. gal

Maximum Recovery

Recovery at 40 ºF Temperature Rise

 N/A 963 gal/h

Recovery at 50 ºF Temperature Rise

 N/A 770.4 gal/h

Recovery at 60 ºF Temperature Rise

 N/A 642 gal/h

Recovery at 70 ºF Temperature Rise

 N/A 550.3 gal/h

Recovery at 80 ºF Temperature Rise

 N/A 481.5 gal/h

Recovery at 90 ºF Temperature Rise

 N/A 428 gal/h

Recovery at 100 ºF Temperature Rise

 N/A 390.7 gal/h

Recovery at 110 ºF Temperature Rise

 N/A 350.1 gal/h

Recovery at 120 ºF Temperature Rise

 N/A 321 gal/h

Recovery at 130 ºF Temperature Rise

 N/A 296.3 gal/h

Recovery at 140 ºF Temperature Rise

 N/A 275.1 gal/h

Features

Features

 N/A
  • Reduced Installation Costs! Adjusts to use existing & prior approved ventilation systems.
  • Use American Standard Commercial Gas Water Heaters as the Universal.
  • Replacement for All Brands. Uses same location for water connection & gas piping as model(s) being replaced. Offers 2" front & back water connection and 1-1/2" top connection on selected models. Front & back are plugged for your convenience.
  • Dura-Glas Enamel, Heavy Duty Multi-Flue Steel Tank - fired at 1600 degree for optimal tank protection from the effects of corrosion.
  • R-8 Foam Insulated.
  • Automatic Motorized Flue Damper - to reduce heat loss during standby periods for lowest operating costs.
  • Electronic Direct Spark Ignition System - Saves fuel by eliminating constant burning pilot.
  • Four Anode Rods - to ensure maximum tank life.
  • Fully Adjustable Controls - to 180 degree temperature.
  • Turbulence-inducing Cold Water Inlet Dip Tube on 1-1/2" Top Water Connections - to reduce settlement of hard water sediment.
  • Factory Installed Temperature/Pressure Relief Valve.
  • Easy Access Full Size Inspection Port/Hand Hole Clean Out.

Testing and Certifications

Testing and Certifications

 N/A ETL Design Certified in accordance with ANSI Z21.10.3 for up to 180 degree operation as an automatic storage and/or automatic circulation tank heater and meets ASHRAE 90.1-1999

CEC listed, ETL certified to meet NSF/ANSI 5 Standards

Warranty

Warranty

 N/A
  • 3-Year Limited Warranty - On Inner Glass-Lined Tank.
  • 1-Year Limited Warranty - On all Other Component Parts.
  • Ask about upgrading the Warranty to 5 years at time of sale with additional anode rod protection.

Note

Note

 N/A Ultra-Low NOx Burner - Exceeds California SCAQMD & BAAQMD Requirements.