Catalog
Request Information Search by Specification
Unit of Measure
Items
Model D-75-399-AS 75 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heaters

Model D-75-399-AS 75 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heater
Model D-75-365-AS 75 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heaters

Model D-75-365-AS 75 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heater
American Standard® Commercial Water Heaters

Model D-80-180-AS 80 Gallon (gal) Heavy Duty Storage Direct Spark Ignition Dampered Commercial Gas Water Heater
Model D-80-199-AS 80 Gallon (gal) Heavy Duty Storage Direct Spark Ignition Dampered Commercial Gas Water Heaters

Model D-80-199-AS 80 Gallon (gal) Heavy Duty Storage Direct Spark Ignition Dampered Commercial Gas Water Heater
Model D-80-512-AS 80 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heaters

Model D-80-512-AS 80 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heater
Manufacturer N/A American Standard®
Tank Capacity N/A 75 gal N/A 75 gal N/A 80 gal N/A 80 gal N/A 80 gal
Input Power N/A 399900 BTU N/A 365000 BTU N/A 180000 BTU N/A 199900 BTU N/A 512000 BTU
Type N/A Natural Gas
Model Type N/A SCAQMD Low NOx
Thermal Efficiency N/A 81 % N/A 81 % N/A 80 % N/A 80 % N/A 80 %
Schematic N/A
Schematic Drawing for Model D-75-399-AS 75 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heaters
 		N/A
Schematic Drawing for Model D-75-365-AS 75 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heaters
 		N/A
Schematic Drawing for Model D-80-180-AS 80 Gallon Heavy Duty Storage Direct Spark Ignition Dampered Commercial Gas Water Heaters
 		N/A
Schematic Drawing for Model D-80-199-AS 80 Gallon (gal) Heavy Duty Storage Direct Spark Ignition Dampered Commercial Gas Water Heaters
 		N/A
Schematic Drawing for Model D-80-512-AS 80 Gallon (gal) Heavy Duty Instantaneous Direct Spark Ignition Dampered Commercial Gas Water Heaters
Exterior Dimension A N/A 75-3/4 in N/A 75-3/4 in N/A 75-1/4 in N/A 68-1/4 in N/A 72-1/4 in
Exterior Dimension B N/A 30-1/4 in N/A 30-1/4 in N/A 26-1/4 in N/A 28-1/4 in N/A 30-1/4 in
Exterior Dimension C N/A 66-1/4 in N/A 66-1/4 in N/A 67-1/2 in N/A 60-1/2 in N/A 66-1/2 in
Vent Size N/A 8 in N/A 8 in N/A 6 in N/A 6 in N/A 10 in
Top Pipe Size N/A N/A N/A 1-1/2 in N/A 1-1/2 in N/A
Rear and Front Water Connection N/A 2 in
Height to Top Water I.P.S. Connection D N/A N/A N/A 70 in N/A 63-5/8 in N/A
Top Spread Water I.P.S. Connection E N/A N/A N/A 19-5/8 in N/A 21-1/4 in N/A
Height to Rear and Front Hot Water I.P.S. Connection F N/A 57 in N/A 57 in N/A 55-1/4 in N/A 52 in N/A 57 in
Height to Rear and Front Cold Water I.P.S. Connection G N/A 19-1/4 in N/A 19-1/4 in N/A 22-3/4 in N/A 18-3/4 in N/A 19-1/4 in
Gas I.P.S. Connection Height H N/A 4-3/4 in
Gas I.P.S. Connection Size N/A 3/4 in N/A 3/4 in N/A 1/2 in N/A 1/2 in N/A 1 in
Height to T and P Opening J N/A 58-1/4 in N/A 58-1/4 in N/A 57-1/8 in N/A 53-5/8 in N/A 58-1/4 in
T and P Opening N/A 1 in N/A 1 in N/A 3/4 in N/A 3/4 in N/A 1 in
Recovery at 40 ºF Temperature Rise N/A 982 gal/h N/A 895 gal/h N/A 436 gal/h N/A 485 gal/h N/A 1241 gal/h
Recovery at 50 ºF Temperature Rise N/A 785 gal/h N/A 716 gal/h N/A 349 gal/h N/A 388 gal/h N/A 993 gal/h
Recovery at 60 ºF Temperature Rise N/A 654 gal/h N/A 597 gal/h N/A 291 gal/h N/A 323 gal/h N/A 827 gal/h
Recovery at 70 ºF Temperature Rise N/A 561 gal/h N/A 511 gal/h N/A 249 gal/h N/A 277 gal/h N/A 709 gal/h
Recovery at 80 ºF Temperature Rise N/A 491 gal/h N/A 448 gal/h N/A 218 gal/h N/A 242 gal/h N/A 621 gal/h
Recovery at 90 ºF Temperature Rise N/A 436 gal/h N/A 398 gal/h N/A 194 gal/h N/A 215 gal/h N/A 552 gal/h
Recovery at 100 ºF Temperature Rise N/A 393 gal/h N/A 358 gal/h N/A 175 gal/h N/A 194 gal/h N/A 496 gal/h
Recovery at 110 ºF Temperature Rise N/A 357 gal/h N/A 326 gal/h N/A 159 gal/h N/A 176 gal/h N/A 451 gal/h
Recovery at 120 ºF Temperature Rise N/A 327 gal/h N/A 298 gal/h N/A 145 gal/h N/A 162 gal/h N/A 414 gal/h
Recovery at 130 ºF Temperature Rise N/A 302 gal/h N/A 276 gal/h N/A 134 gal/h N/A 149 gal/h N/A 382 gal/h
Recovery at 140 ºF Temperature Rise N/A 280 gal/h N/A 256 gal/h N/A 125 gal/h N/A 138 gal/h N/A 355 gal/h
Storage Capacity N/A 75 U.S. gal N/A 75 U.S. gal N/A 80 U.S. gal N/A 80 U.S. gal N/A 80 U.S. gal
One Hour Recovery at 100 ºF Temperature Rise N/A 393 gal/h N/A 358 gal/h N/A 175 gal/h N/A 194 gal/h N/A 496 gal/h
Maximum Hot Water Delivery (1 Hour) N/A 446 L N/A 411 L N/A 231 L N/A 250 L N/A 552 L
Maximum Hot Water Delivery (2 Hours) N/A 839 L N/A 769 L N/A 406 L N/A 444 L N/A 1048 L
Maximum Hot Water Delivery (3 Hours) N/A 1232 L N/A 1179 L N/A 581 L N/A 638 L N/A 1544 L
Maximum Hot Water Delivery Recovery at 100 ºF Temperature Rise N/A 6.6 g/min N/A 5.9 g/min N/A 2.9 g/min N/A 3.2 g/min N/A 8.3 g/min
AC Voltage N/A 120 V
Frequency N/A 60 Hz
Current N/A <5 A
Size N/A C
Test Pressure N/A 300 psi
Working Pressure N/A 150 psi
Industry Standards N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE Standards 1992 90.1b NSF N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE Standards 90.1-1999 ASME Certified N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE Standards 90.1-1999 NSF N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE Standards 90.1-1989 NSF N/A ANSI Z-21.10.3 - CSA 4.3 ASHRAE Standards 90.1-1999 NSF
Testing and Certifications N/A
  • American Standard® gas water heaters are certified at 300 PSI test pressure and for 150 PSI working pressure. All tanks are hydrostatically tested at the factory
  • Tested and listed with CSA® International in accordance with ANSI Z21.10.3 CSA® 4.3 for up to 180 ºF operation as an instantaneous and/or automatic circulating tank heater. Meets ASHRAE 1992 90.1b
 		N/A
  • Tested & Listed with CSA® International - in accordance with ANSI Z21.10.3 - CSA® 4.3 for up to 180 ºF operation as an instantaneous and/or automatic circulating tank heater. Meets ASHRAE 1992 90.1b
 		N/A Tested & Listed with CSA® International - In accordance with ANSIZ21.10.3 - CSA® 4.3 for up to 180 ºF operation as an automatic storage and/or automatic circulating tank heater. Meets ASHRAE Standard 90.11999 addendum 90.1b. CSA® certified to meet NSF/ANSI 5 Standards. N/A
  • American Standard® gas water heaters are certified at 300 PSI test pressure and for 150 PSI working pressure. All tanks are hydrostatically tested at the factory
  • Tested and listed with CSA® International in accordance with ANSI Z21.10.3 - CSA® 4.3 for up to 180 ºF operation as an automatic storage and/or automatic circulating tank heater. Meets ASHRAE Standard 90.1 1989 addendum 90.lb. CSA® certified to meet NSF/ANSI 5 Standards
 		N/A
  • American Standard® gas water heaters are certified at 300 PSI test pressure and for 150 PSI working pressure. All tanks are hydrostatically tested at the factory
  • Tested and listed with CSA® International in accordance with ANSI Z21.10.3 - CSA® 4.3 for up to 180 ºF operation as an instantaneous and/or automatic circulating tank heater. Meets ASHRAE Standard 90.1 1999
Features N/A
  • Heavy Gauge Steel Tank utilizes only twelve internal flue tubes resulting in fewer critical welds to yield added years of trouble-free service.
  • ASME Construction Model available.
  • Inner tank glass-lined with Dura-Glas™ and fired at 1600 ºF for optimum protection from the effects of corrosion.
  • R-8.3 non-CFC foam insulated to save energy and reduce fuel costs by maximizing heat retention.
  • Four anode rods to prolong tank life.
  • Self-Cleaning turbulence inducing cold water inlet-tube engineered to diminish hard water area sediment deposits.
  • Full size hand-hole cleanout for eased tank inspection and/or removal of sediment deposits.
  • Electronic direct-spark ignition system saves fuel by eliminating the need for a standby gas pilot.
  • Automatic motorized flue damper reduces tank heat loss during standby periods for lowest operating costs.
  • Fully adjustable 24-volt controls provide temperature settings to 180 ºF. When installed with a mixing valve, the D-75-399-AS can deliver 180 ºF sanitizing and 140 ºF general purpose hot water simultaneously.
  • Factory installed energy cut-off system and pressure/temperature relief valve.
  • Two inch rear and front water connections for simplified replacement of similar units, connection to circulating lines and eased multiple heater or storage tank installations. CSA® certified to meet NSF/ANSI 5 Standards.
 		N/A
  • Heavy Gauge Steel Tank - utilizes only twelve internal flue tubes resulting in fewer critical welds to yield added years of trouble - free service.
  • ASME Construction Model Available. Inner Tank Glass-Lined - with Dura-Glas™ & fired at 1600 ºF for optimum protection from the effects of corrosion.
  • R-8.3 Non-CFC Foam Insulated - to save energy and reduce fuel costs by maximizing heat retention.
  • Four Anode Rods.
  • Self-Cleaning Turbulence Inducing Cold Water Inlet-Tube - engineered to diminish hard water area sediment deposits.
  • Full Sized Hand - Hole Cleanout - for eased tank inspection and/or removal of sediment deposits.
  • Electronic Direct-Spark Ignition System - saves fuel by eliminating the need for a standby gas pilot.
  • Automatic Motorized Flue Damper - reduces tank heat loss during standby periods for lowest operating costs.
  • Fully Adjustable 24 - Volt Controls - provide temperature settings to 180 ºF. When installed with a mixing valve, the D-75-365-AS can deliver 180 ºF sanitizing and 140 ºF general purpose hot water simultaneously.
  • Factory Installed Energy Cut-Off System & Pressure/Temperature Valve.
  • Two Inch Rear & Front Water Connections - for simplified replacement of similar units, connection to circulating lines and eased multiple heater or storage tank installations. CSA® certified to meet NSF/ANSI 5 Standards.
  • AMERICAN STANDARD Gas Water Heaters - are certified at 300 psi test pressure and for 150 psi working pressure. All tanks are hydrostatically tested at the factory.
 		N/A
  • Heavy Gauge Steel Tank - Incorporating fewer internal flue tubes resulting in fewer critical welds to yield added years of trouble-free service.
  • Inner Tank Glass - Lined - With Dura - Glas™ and fired at 1600° F for optimum protection from the effects of corrosion.
  • R- 8.3 Non - CFC Foam Insulated - To save energy and reduce fuel costs by maximizing heat retention.
  • Four Anode Rods - To ensure maxim um tank life.
  • Full Size Hand - Hole Cleanout - For eased tank inspection and/or removal of sediment deposits.
  • Electronic Direct - Spark Ignition System - Saves fuel by eliminating the need for a standby gas pilot.
  • Automatic Motorized Flue Damper - Reduces tank heat loss during standby periods for lowest operating costs.
  • Fully Adjustable 24 - Volt Controls - Provide temperature settings to 180 ºF. When installed with a mixing valve, the D-80-180-AS can deliver 180 ºF sanitizing and 140 ºF general purpose hot water simultaneously.
  • Factory Installed Energy Cut - Off System & Pressure/Temperature Relief Valve.
  • Top 1 1/2", 2" Rear & 2" Front Water Connections - for universal replacements, connection to circulating lines & eased multiple heater or storage tank installations.
  • American Standard® Gas Water Heaters - are certified at 300 psi test pressure & for 150 psi working pressure. All tanks are hydrostatically tested at the factory.
 		N/A
  • Heavy Gauge Steel Tank incorporating only five internal flue tubes resulting in fewer critical welds to yield added years of trouble-free service.
  • Inner tank glass-lined with Dura-Glas™ and fired at 1600 ºF for optimum protection from the effects of corrosion.
  • R-8.3 non-CFC foam insulated to save energy and reduce fuel costs by maximizing heat retention.
  • Four anode rods to ensure maximum tank life.
  • Self-Cleaning turbulence inducing cold water inlet-tube engineered to diminish hard water area sediment deposits.
  • Full size hand-hole cleanout for eased tank inspection and/or removal of sediment deposits.
  • Electronic direct-spark ignition system saves fuel by eliminating the need for a standby gas pilot.
  • Automatic motorized flue damper reduces tank heat loss during standby periods for lowest operating costs.
  • Fully adjustable 24-volt controls provide temperature settings to 180 ºF. When installed with a mixing valve, the D-80-199-AS can deliver 180 ºF sanitizing and 140 ºF general purpose hot water simultaneously.
  • Factory installed energy cut-off system and pressure/temperature relief valve.
  • Top 1 1/2", 2" rear and 2" front water connections for universal replacements, connection to circulating lines and eased multiple heater or storage tank installations.
 		N/A
  • Heavy Gauge Steel Tank utilizes fewer internal flue tubes resulting in fewer critical welds to yield added years of trouble-free service.
  • ASME Construction Model available.
  • Inner tank glass-lined with Dura-Glas™ and fired at 1600 ºF for optimum protection from the effects of corrosion.
  • R-8.3 non-CFC foam insulated to save energy and reduce fuel costs by maximizing heat retention.
  • Four anode rods to prolong tank life.
  • Full size hand - hole cleanout for eased tank inspection and/or removal of sediment deposits.
  • Electronic direct - spark ignition system saves fuel by eliminating the need for a standby gas pilot.
  • Automatic motorized flue damper reduces tank heat loss during standby periods for lowest operating costs.
  • Fully adjustable 24-volt controls provide temperature settings to 180 ºF. When installed with a mixing valve, the D-80-512-AS can deliver 180 ºF sanitizing and 140 ºF general purpose hot water simultaneously.
  • Factory installed energy cut-off system and pressure/temperature valve.
  • Two inch rear and front water connections for simplified replacement of similar units, connection to circulating lines and eased multiple heater or storage tank installations. CSA® certified to meet NSF/ANSI 5 Standards.
Warranty N/A
  • 3-Year Limited Warranty - On Inner Glass-Lined Tank.
  • 1-Year Limited Warranty - On all Other Component Parts.
Note N/A This water heater meets the requirements of ASHRAE 1992 standard addendum 90.1b and meets or exceeds the thermal efficiency and standby loss requirements of california and other states recognizing ASHRAE.

Recovery rate indicated on heater rating plate is based on 75% (76%) thermal efficiency according to CSA (ANZI, Z.21.10.3). Manufacturer reserves the right to make product changes and/or improvements with or without notice. 		N/A This water heater meets the requirements of ASHRAE 1992 standard addendum 90.1b and meets or exceeds the thermal efficiency and standby loss requirements of california and other states recognizing ASHRAE.

Recovery rate indicated on heater rating plate is based on 75% (76%) thermal efficiency according to CSA (ANSI, Z.21.10.3). Manufacturer reserves the right to make product changes and/or improvements with or without notice. 		N/A This water heater meets the requirements of ASHRAE and meets or exceeds the thermal efficiency requirements of california and other states recognizing ASHRAE. Recognizing ASHRAE.

Recovery rate indicated on heater rating plate is based on 75% (76%) thermal efficiency according to CSA (ANSI, Z.21.10.3). Manufacturer reserves the right to make product changes and/or improvements with or without notice. 		N/A This water heater meets the requirements of ASHRAE 1992 standard addendum 90.1b and meets or exceeds the thermal efficiency and standby loss requirements of California and other states recognizing ASHRAE. N/A This water heater meets the requirements of ASHRAE 90.1 1999 and meets or exceeds the thermal efficiency requirements of California and other states recognizing ASHRAE.