Catalog
Unit of Measure
Items
Image

Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters

Image

Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters

Image

Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters

Image

Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters

Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters

Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters
Manufacturer N/A Bradford White®
Capacity N/A 75 U.S. gal63 Imp. gal284 L N/A 75 U.S. gal63 Imp. gal284 L N/A 75 U.S. gal63 Imp. gal284 L N/A 75 U.S. gal63 Imp. gal284 L N/A 100 U.S. gal83 Imp. gal379 L
Input Power N/A 76000 BTU/hr22.3 kW N/A 76000 BTU/hr22.3 kW N/A 76000 BTU/hr22.3 kW N/A 76000 BTU/hr22.3 kW N/A 85000 BTU/hr24.9 kW
Recovery at 100 ºF Temperature Rise
N/A 74 U.S. gal/h62 Imp. gal/h N/A 74 U.S. gal/h62 Imp. gal/h N/A 74 U.S. gal/h62 Imp. gal/h N/A 74 U.S. gal/h62 Imp. gal/h N/A 82 U.S. gal/h69 Imp. gal/h
Recovery at 56 ºC Temperature Rise
N/A 280 L/h N/A 280 L/h N/A 280 L/h N/A 280 L/h N/A 310 L/h
Type N/A Natural Gas N/A Liquid Propane Gas N/A Natural Gas N/A Liquid Propane Gas N/A Natural Gas
Schematic N/A
Schematic Drawing for Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters (75T-80 Model)
N/A
Schematic Drawing for Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters (75T-80 Model)
N/A
Schematic Drawing for Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters (75T-80 Model)
N/A
Schematic Drawing for Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters (75T-80 Model)
N/A
Schematic Drawing for Light Duty Commercial Atmospheric Vent High Input Energy Saver Gas Water Heaters (100T-88 Model)
Floor to Flue Connection A N/A 62-3/8 in1575 mm N/A 62-3/8 in1575 mm N/A 62-3/8 in1575 mm N/A 62-3/8 in1575 mm N/A 69-1/32 in1745 mm
Jacket Diameter B N/A 26 in660 mm N/A 26 in660 mm N/A 26 in660 mm N/A 26 in660 mm N/A 28-1/4 in718 mm
Vent Size C N/A 4 in102 mm
Floor to T and P Connection D N/A 51-3/4 in1321 mm N/A 51-3/4 in1321 mm N/A 51-3/4 in1321 mm N/A 51-3/4 in1321 mm N/A 59-3/8 in1507 mm
Floor to Gas Connection E N/A 15 in381 mm N/A 15 in381 mm N/A 15 in381 mm N/A 15 in381 mm N/A 15-17/32 in397 mm
Floor to Space Heating Inlet F N/A 16-5/8 in432 mm N/A 16-5/8 in432 mm N/A 16-5/8 in432 mm N/A 16-5/8 in432 mm N/A 17-3/4 in448 mm
Floor to Space Heating Outlet G N/A 51-3/4 in1321 mm N/A 51-3/4 in1321 mm N/A 51-3/4 in1321 mm N/A 51-3/4 in1321 mm N/A 50-23/32 in1286 mm
Floor to Water Connection H N/A 60-5/8 in1549 mm N/A 60-5/8 in1549 mm N/A 60-5/8 in1549 mm N/A 60-5/8 in1549 mm N/A 67-23/32 in1651 mm
Depth K N/A 28-3/8 in718 mm N/A 28-3/8 in718 mm N/A 28-3/8 in718 mm N/A 28-3/8 in718 mm N/A 32-1/4 in797 mm
Approximate Shipping Weight N/A 247 lb112 kg N/A 247 lb112 kg N/A 247 lb112 kg N/A 247 lb112 kg N/A 420 lb191 kg
Test Pressure N/A 300 psi2068 kPa
Working Pressure N/A 150 psi1034 kPa
Style N/A Light-Duty High Input Atmosphere Vent
Size N/A C
Industry Standards N/A ANSI Standards Z-21.10.3 ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified
Features N/A
  • Bradford White ICON System™ - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter. A standard, off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor. No need for external electricity.
    • Enhanced Performance - Proprietary algorithms provide tighter temperature differentials.
    • Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels (up to 180 ºF).
    • Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting.
    • Pilot On Indication - Flashing green LED provides positive indication that pilot is on.
    • Separate Immersed Thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water. No need to drain the tank when removing gas valve.
  • Factory Installed Hydrojet 2™ Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank.
  • Vitraglas® Lining - Bradford White tanks are lined with a exclusively engineered enamel formula that provides superior protection from the highly corrosive effects of hot water. This formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 ºF.
  • Side Connections - 3/4" NPT tappings that allow easy connections for space heating applications (potable water only).
  • 2" Non-CFC Foam Insulation - Covers the sides and top of tank, reducing the amount of heat loss. This results in less energy consumption, improved operation efficiencies and jacket rigidity.
  • Pedestal Base (75 gallon).
  • Water Connections - Factory installed true dielectric fittings extend water heater life and eases installation (75T has 1" NPT and 100T has 1-1/4" NPT).
  • Hand Hole Cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits (optional on 75T models).
  • Protective Magnesium Anode Rod.
  • 4" "Snap Lock" Draft Diverter.
  • T&P Relief Valve - Installed.
  • Low Restriction Brass Drain Valve - Durable tamper proof design.
General Information N/A All gas water heaters are certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). The 75 gallon model (284 liters) has 1" (25 mm) water connections on 11" (279 mm) centers and 100 gallon model (379 liters) has 1-1/4" (32 mm) water connections on 16" (406 mm) centers. All gas connections are 1/2" (13 mm).

All models design certified by CSA International (formerly AGA/CGA), ANSI standard Z-21.10.3 and peak performance rated.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Suitable for Water (Potable) Heating and Space Heating.

Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or component(s) previously used with a non-potable water heating appliance.
Warranty N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.
N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.
N/A
  • 5-Year Limited Tank Warranty.
  • 1-Year Limited Warranty on Component Parts.
N/A
  • 5-Year Limited Tank Warranty.
  • 1-Year Limited Warranty on Component Parts.
N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.
Note N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed 80% Thermal Efficiency.

75T has optional hand hole cleanout.

Meets NAECA Requirements.
N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed 80% Thermal Efficiency.

Propane models feature a Titanium Stainless Steel propane burner.

75T has optional hand hole cleanout.

Meets NAECA Requirements.
N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed 80% Thermal Efficiency.

75T has optional hand hole cleanout.

Meets NAECA Requirements.
N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed 80% Thermal Efficiency.

Propane models feature a Titanium Stainless Steel propane burner.

75T has optional hand hole cleanout.

Meets NAECA Requirements.
N/A Meet or exceed ASHRAE 90.1b (Current standard) C.E.C. Listed 80% Thermal Efficiency.

100T models feature hand hole cleanout.

Meets NAECA Requirements.