Catalog
Sandblaster ® Booster commercial gas water heaters are designed to provide high temperature water (usually 180 ºF) to commercial dishwashers. In these applications, the booster water heater is installed in conjunction with a standard water heater, which delivers lower-temperature water to serve the non-dishwashing needs of a restaurant or other foodservice application.
Request Information
Unit of Measure
Items
Sandblaster® Booster Models Self-Cleaning Commercial Gas Water Heaters

Sandblaster® Booster Models Self-Cleaning Commercial Gas Water Heaters
Sandblaster® Booster Models Self-Cleaning Commercial Gas Water Heaters

Sandblaster® Booster Models Self-Cleaning Commercial Gas Water Heaters
Manufacturer N/A State®
Capacity N/A 32 gal
Input Power N/A 150000 BTU/hr N/A 199900 BTU/hr
First Hour Rating at 100 ºF Temperature Rise N/A 167 gal N/A 216 gal
Recovery at 40 ºF Temperature Rise N/A 364 gal/h N/A 485 gal/h
Recovery at 100 ºF Temperature Rise N/A 145 gal/h N/A 194 gal/h
Recovery at 140 ºF Temperature Rise N/A 104 gal/h N/A 139 gal/h
Schematic N/A
Schematic Drawing for Sandblaster® Booster Models Self-Cleaning Commercial Gas Water Heaters
Dimension A N/A 45 in
Dimension B N/A 40 in
Dimension C N/A 27-3/4 in
Dimension D N/A 32-1/4 in
Dimension E N/A 15-3/4 in
Dimension F N/A 5 in
Dimension G N/A 6-1/2 in
Dimension H N/A 6 in
Gas Connection N/A 3/4 in
Water Connection N/A 1-1/2 in
Approximate Shipping Weight N/A 400 lb
Maximum Hydrostatic Working Pressure N/A 150 psi
Thermal Efficiency N/A 80 %
Style N/A Sandblaster® Booster Model
Size N/A C
Type N/A Liquid Propane Gas Natural Gas
Industry Standards N/A AHRI Certified® ANSI Z-21.10.3 - CSA 4.3 ASHRAE/IESNA 90.1 ASME Certified CSA® Certified UL® Listed
Features N/A State Hydro Cannon™ Self-Cleaning Device
  • Significantly reduces buildup of lime, sand and other sediment in the tank.
  • Helps water heaters retain their rated efficiency longer and reduce water heating costs.
Induced-Draft Design
  • Built-in blower produces power-induced draft of makeup air prior to burner ignition, for more efficient control of heat through the flue collector.
  • Eliminates performance problems caused by negative indoor air pressure.
  • Requires no draft hood or barometric damper.
Rated as Category 1 Appliance
  • Can be commonly vented with other Category 1 appliances, using standard metal type "B" vent.
Multiple Anode Rods
  • Protect tank from corrosion.
Three Water Connection Options
  • Hot water outlet located on the top and both hot and cold water inlets are on the front of the water heater.
  • Hydro Cannon device operates when front cold water connection is used.
Intermittent Electronic Ignition
  • Provides flame failure response in less than one second.
  • Includes power ON/OFF switch.
  • Eliminates standing pilot.
Testing and Certifications N/A
  • CSA® Certified and ASME Rated T&P Relief Valve
  • Meets the thermal efficiency and standby loss requirements of the U.S. Department of Energy and Current Edition ASHRAE/IESNA 90.1