WATER HEATER SALES
WATER HEATER SALES
1425 W 135th St.
Gardena, California 90249
Phone: 844.323.5959
Email: sales@waterheatersales.com
Website: www.waterheatersales.com
Print Back
Unit of Measure

Specifications

Manufacturer

 N/A Bradford White®

Capacity

 N/A 55 U.S. gal46 Imp. gal208 L

Input Power

 N/A 80000 BTU/hr23.5 kW

Type

 N/A Natural Gas

Approximate Shipping Weight

 N/A 200 lb91 kg

Distance Between Centers X

 N/A 8 in

Depth of Mixing Device Y

 N/A 2-1/2 in

Height to Center of Pipe Z

 N/A 6 in

Style

 N/A Light-Duty High Performance Atmospheric Vent

Size

 N/A C

Test Pressure

 N/A 300 psi2068 kPa

Working Pressure

 N/A 150 psi1034 kPa

Gas Connection

 N/A 1/2 in13 mm

Industry Standards

 N/A ANSI Standards Z-21.10.3 ASHRAE 90.1b (Current Standards) C.E.C. Listed CSA® Certified

Maximum Recovery

Recovery at 100 ºF Temperature Rise

 N/A 78 U.S. gal/h65 Imp. gal/h

Recovery at 56 ºC Temperature Rise

 N/A 295 L/h

Dimensions

Schematic

 N/A
Light Duty Commercial High Performance Energy Saver Gas Water Heaters (55X-80B-3N) - 2

Floor to Flue Connection A

 N/A 59-5/8 in1514 mm

Jacket Diameter B

 N/A 22 in559 mm

Vent Size C

 N/A 4 in102 mm

Floor to T and P Connection D

 N/A 50 in1270 mm

Floor to Gas Connection E

 N/A 14-13/16 in376 mm

Floor to Space Heating Return F

 N/A 15-7/16 in392 mm

Floor to Space Heating Outlet G

 N/A 50 in1270 mm

Floor to Heater Top H

 N/A 56 in1422 mm
Floor to Water Connection J1 N/A 60 in1524 mm

Depth K

 N/A 26-1/4 in667 mm

Features

Features

 N/A
  • High Input Combustion System - Generates enough hot water for mop sinks, wash tubs and large wash sinks in addition to standard commercial duty.
  • Integrated Mixing Device - Features an accurate, easy to use hand wheel for adjusting mixed water temperature, a pre-piped stainless steel flexible connector for quick installation as well as optional water connections (1/2" NPT recirculation inlet, 1/2" NPT hot water outlet, 1/4" NPT cold water outlet). This required system is easily installed and ensures a comfortable outlet temperature while providing a steady flow of hot water.
  • Helical Fin Flue - Designed to maximize the amount of heat transferred to water decreasing recovery time. Minimizes air movement in the heater during standby periods to retard heat loss up the flue.
  • Factory Installed Hydrojet 2™ Total Performance System - Cold water inlet sediment reducing device helps prevent sediment build up in tank.
  • Vitraglas® Lining - Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating. The Bradford White high silica Vitraglas® lining provides a tough interior surface for our hot water tanks.
  • Fully Automatic Controls - Automatic temperature selection at your fingertips (up to 180 °F). Built-in energy cut-off switch prevents abnormally high water temperature for extra safety. Built-in gas pressure regulation.
  • 3/4" NPT Side Connections.
  • Non-CFC Foam Insulation - 1" of energy saving insulation covers the sides and top of the tank, reducing the amount of heat loss while increasing jacket rigidity.
  • Water Connections - 3/4" NPT factory installed true dielectric fittings.
  • Two Protective Magnesium Anode Rods.
  • 4" "Snap Lock" Draft Diverter.
  • T&P Relief Valve - Installed.
  • Low Restriction Brass Drain Valve - Durable tamper proof design.

General Information

General Information

 N/A All gas water heaters are certified at 300 psi test pressure (2068 kPa) and 150 psi working pressure (1034 kPa). All water connections are 3/4" NPT (19 mm) on 8" (203 mm) centers. All gas connections are 1/2" (13 mm).

All models design certified by CSA International (formerly AGA/CGA), ANSI standard Z-21.10.3 and peak performance rated.

Dimensions and specifications subject to change without notice in accordance with our policy of continuous product improvement.

Suitable for Water (Potable) Heating and Space Heating.

Toxic chemicals, such as those used for boiler treatment, shall NEVER be introduced into this system. This unit may NEVER be connected to any existing heating system or components previously used with a non-potable water heating appliance.

Warranty

Warranty

 N/A
  • 3-Year Limited Tank Warranty / 1-Year Limited Warranty on Component Parts.

Note

Note

 N/A Meet or exceed ASHRAE 90.1b (current standard) C.E.C. Listed 82% Thermal Efficiency.

Propane models feature a Titanium Stainless Steel propane burner.
  • 1 Dimension to top of installed mixing device.