Print Back
Designed as the Universal Replacement for All brands of Non-Ultra-Low NOx commercial models

Ultra-Low NOx Heavy Duty Commercial Product Offering - The most complete line - 12 models ranging from 125,000 BTU to 512,000 BTU input.
Unit of Measure

Specifications

Manufacturer

American Standard®

Tank Capacity

80 gal

Input Power

165000 BTU

Thermal Efficiency

80.29 %

Size

C

Type

Natural Gas

Industry Standards

C.E.C. Listed ETL

Dimensions

Schematic


Schematic Drawing for Ultra-Low NOx Heavy Duty Commercial Gas Water Heaters

Exterior Dimension A

72-5/8 in

Exterior Dimension B

26-1/4 in

Exterior Dimension C

65 in

Vent Size

6 in

Top Pipe Size

1-1/2 in

Rear and Front Water Connection

2 in

Height to Top Water I.P.S. Connection D

69 in

Top Spread Water I.P.S. Connection E

19-5/8 in

Height to Rear and Front Hot Water I.P.S. Connection F

55-1/2 in

Height to Rear and Front Cold Water I.P.S. Connection G

29-1/4 in

Gas I.P.S. Connection Height H

4 in

Gas I.P.S. Connection Size

3/4 in

Height to T and P Opening J

57-7/8 in

T and P Opening

3/4 in

Width with Blower K

20 in

Width with Blower L

6.75 in

Width with Blower M

33.25 in

Maximum Hot Water Delivery

One Hour Recovery at 100 ºF Temperature Rise

155 gal/h

Maximum Hot Water Delivery (1 Hour)

216 L

Maximum Hot Water Delivery (2 Hours)

376 L

Maximum Hot Water Delivery (3 Hours)

536 L

Maximum Hot Water Delivery Recovery at 100 ºF Temperature Rise

2.7 g/min

Storage Capacity

80 U.S. gal

Maximum Recovery

Recovery at 40 ºF Temperature Rise

395.2 gal/h

Recovery at 50 ºF Temperature Rise

316.2 gal/h

Recovery at 60 ºF Temperature Rise

263.5 gal/h

Recovery at 70 ºF Temperature Rise

225.8 gal/h

Recovery at 80 ºF Temperature Rise

197.6 gal/h

Recovery at 90 ºF Temperature Rise

175.6 gal/h

Recovery at 100 ºF Temperature Rise

155 gal/h

Recovery at 110 ºF Temperature Rise

143.7 gal/h

Recovery at 120 ºF Temperature Rise

131.7 gal/h

Recovery at 130 ºF Temperature Rise

121.6 gal/h

Recovery at 140 ºF Temperature Rise

112.9 gal/h

Features

Features

  • Reduced Installation Costs! Adjusts to use existing & prior approved ventilation systems.
  • Use American Standard Commercial Gas Water Heaters as the Universal.
  • Replacement for All Brands. Uses same location for water connection & gas piping as model(s) being replaced. Offers 2" front & back water connection and 1-1/2" top connection on selected models. Front & back are plugged for your convenience.
  • Dura-Glas Enamel, Heavy Duty Multi-Flue Steel Tank - fired at 1600 degree for optimal tank protection from the effects of corrosion.
  • R-8 Foam Insulated.
  • Automatic Motorized Flue Damper - to reduce heat loss during standby periods for lowest operating costs.
  • Electronic Direct Spark Ignition System - Saves fuel by eliminating constant burning pilot.
  • Four Anode Rods - to ensure maximum tank life.
  • Fully Adjustable Controls - to 180 degree temperature.
  • Turbulence-inducing Cold Water Inlet Dip Tube on 1-1/2" Top Water Connections - to reduce settlement of hard water sediment.
  • Factory Installed Temperature/Pressure Relief Valve.
  • Easy Access Full Size Inspection Port/Hand Hole Clean Out.

Testing and Certifications

Testing and Certifications

ETL Design Certified in accordance with ANSI Z21.10.3 for up to 180 degree operation as an automatic storage and/or automatic circulation tank heater and meets ASHRAE 90.1-1999

CEC listed, ETL certified to meet NSF/ANSI 5 Standards

Warranty

Warranty

  • 3-Year Limited Warranty - On Inner Glass-Lined Tank.
  • 1-Year Limited Warranty - On all Other Component Parts.
  • Ask about upgrading the Warranty to 5 years at time of sale with additional anode rod protection.

Note

Note

Ultra-Low NOx Burner - Exceeds California SCAQMD & BAAQMD Requirements.