Catalog
The A.O. Smith® BTPD models feature all stainless steel tank construction and are designed for heating deionized water. The tank and other wetted components are suitable for deionized water.

These units are designed for industrial and process water applications and are not recommend normal potable water heating applications. For potable water heating applications A.O. Smith® designs and builds a long list of other models to choose from. This is a process water heater producing non-potable water,more
Unit of Measure

Specifications

Manufacturer

 A. O. Smith®

Storage Capacity

 85 U.S. gal

Input Rating

 199000 BTU/hr

Type

 Liquid Propane Gas Natural Gas

Shipping Weight

 615 lb

Maximum Gas Supply Pressure

 14 inWc

Maximum Working Pressure

 160 psi

Industry Standards

 ASHRAE/IESNA 90.1 ASME Certified C.E.C. Listed CSA® Certified UL® Listed

Maximum Recovery (ºF)

Recovery at 80 ºF Temperature Rise

 239 gal/h

Recovery at 100 ºF Temperature Rise

 191 gal/h

Recovery at 140 ºF Temperature Rise

 137 gal/h

Electrical Characteristics

Motor Power

 1/12 hp

Voltage

 120 V

Frequency

 60 Hz

Phase

 Single

Current

 2.2 A

Dimensions

Schematic

Schematic Drawing for Model BTPD Series Commercial Gas Water Heaters

Features

Features

 Powered Gas Burner
  • Suitable for natural or propane gas (specify when ordering). Powered burner has electronic flame safeguard control with intermittent spark ignition. Also included are main and pilot automatic gas valves, plus gas pressure regulators.
Fully Automatic Controls with Safety Shutoff
  • High temperature limit control (manual reset). CSA®/ASME Certified T & P relief valve. Hinged door control compartment for ease of access. Two thermostats, upper and lower, for accurate temperature control.
    Entire unit UL® listed (File No. MH11631).
Stainless Steel Tank
  • Tank and wetted components suitable for deionized water.
Standard Design Pressure
  • 160 PSI working pressure on all models.
Jacket
  • Is of heavy gauge steel with premium powder coat baked enamel finish.

Other Features

Other Features
  • Two layers of high temperature ceramic fiber insulation in combustion chamber
  • Flame inspection port opening
  • Mounted on rugged channel iron skids
  • Barometric draft regulator
  • 120 volt control circuit
  • Redundant solenoid gas valve

Warranty

Warranty
  • 3-Year Limited Tank Warranty.
  • Factory Start-Up included - Required for activating warranty and assuring maximum operating performance.

Note

Note

 Maximum supply gas pressure 14" W.C. A negative draft of - 0.02" to - 0.07" W.C. is required in vent piping.