Catalog
Unit of Measure

Specifications

Manufacturer

N/A State®

Capacity

N/A 74 gal

Input Power

N/A 75100 BTU/hr

First Hour Rating at 100 ºF Temperature Rise

N/A 125 gal

Gas Connection

N/A 1/2 in

Approximate Shipping Weight

N/A 350 lb

Maximum Hydrostatic Working Pressure

N/A 150 psi

Style

N/A Sandblaster® Light-Duty

Size

N/A C

Type

N/A Natural Gas

Industry Standards

N/A ASHRAE/IESNA 90.1 CSA® Certified NAECA UL® Listed

Maximum Recovery

Recovery at 80 ºF Temperature Rise

N/A 91 gal/h

Recovery at 100 ºF Temperature Rise

N/A 73 gal/h

Recovery at 140 ºF Temperature Rise

N/A 52 gal/h

Dimensions

Schematic

N/A

Dimension A

N/A 61-1/8 in

Dimension B

N/A 58-1/2 in

Dimension C

N/A 26-1/2 in

Dimension D

N/A 15-3/16 in

Dimension E

N/A 16 in

Dimension F

N/A 4 in

Dimension G

N/A 14-1/2 in

Dimension H

N/A 29-11/16 in

Dimension J

N/A 54-1/4 in

Dimension K

N/A 1 in

Features

Features

N/A Sandblaster® SBS Light-Duty Series
  • Recoveries - From 60 to 73 GPH, at 100 ºF Rise.
  • For applications where required first-hour delivery (at 100 ºF Rise) is 142 gallons or less. SBS 100-75 Only.
  • Self-Cleaning Design - Reduces sediment buildup, saves energy and money, prolongs tank life.
  • Low NOx - Complies with Texas and other districts requirements for NOx emissions less than 40 ng/j.
  • Standing Pilot Ignition System.
  • Aluminized Steel Multi-Port Burner - For even heat distribution, maximum efficiency, quiet operation.
  • Foam Insulation - Reduces heat loss over 2-1/2 times more effectively than standard fiberglass.
  • Factory-Installed Energy Cut-Off ("ECO").
  • Anode Rod - Protects glasslined tank against electrolytic corrosion.
  • Tank Inspection Port - (Excludes SBS65 65NE).
  • Maximum Hydrostatic Working Pressure: 150 psi.

Warranty

Warranty

N/A
  • 3-Year Limited Tank Warranty.

Note

Note

N/A All models available in Canada. When ordering, add "CGA" to model number (SBS75 76N CGA).

All Sandblaster® SBS Series water heaters are design-certified by CSA International or UL as Automatic Circulating, Automatic Instantaneous, or Automatic Storage water heaters. When used singly or in manifolded multiples with additional heaters or storage tanks, they can provide an independent hot water system. When installed with a mixing valve, they can provide both 140 ºF general use hot water and 180 ºF sanitizing hot water simultaneously.

All Models over 75,000 Btu input meet the Federal Energy Efficiency Standards effective January 20, 2004, according to the National Appliance Energy Conservation Act (NAECA) of 1992 and meet the thermal efficiency and standby loss requirements of the U.S. Department of Energy and current edition of ASHRAE/IESNA 90.1.